- Jul 22, 2024
TAGUTI Wire EDM Parts
Wire cutting electrical discharge machining is a kind of technology that utilizes the principle of electric spark discharge for metal processing and is often used in the manufacturing of precision parts. Founded in 1997, TAGUTI INDUSTRIAL LIMITED has been continuously innovating and developing for nearly 30 years. It is currently China's largest professional manufacturer of molybdenum wire, filters, electrode copper tubes production and EDM accessories sales. TAGUTI Wire EDM Parts can provide EDM accessories and consumables for wire EDM machines that are compatible with the original factory and have higher cost performance, which can effectively reduce the cost of use. The following are some common wire EDM parts:
Power feed contact
Power feed contact is usually made of carbide. Its surface is polished to reduce contact resistance. It provides current to the brass wire (molybdenum wire), so that the current passes through the brass wire (molybdenum wire) to perform discharge cutting on the workpiece.
High-quality power feed contact has high density, heavy weight, smooth surface, good wear resistance and long service life.
Brass wire (Molybdenum wire)
Brass wire (Molybdenum wire) are commonly used metal wires during wire cut EDM machining. Here are some common specifications of TAGUTI Brass wire: ø0.10mm, ø0.15mm, ø0.20mm, ø0.25mm, ø0.30mm; And the common specifications of TAGUTI molybdenum wire are: ø0.18mm, ø0.20mm. Brass wires (Molybdenum wires) cut metal workpieces and are gradually worn down by the discharge process, so they need to be replaced regularly.
The molybdenum content of TAGUTI molybdenum wire is greater than 99.97%, and the tensile strength is more than 43% better than the national standard. The copper and zinc contents of TAGUTI brass wire are: 63% and 37% respectively, and the tensile strength is available in a variety of options from 450N-1100N.
EDM Filters
EDM Filters are used to filter cutting waste and impurities in the working fluid and maintain the cleanliness of the working fluid to ensure stable processing of the machine tool.
The filter paper specially produced in Germany for the electrical processing industry is selected and has the characteristics of water resistance, oil resistance, good burst resistance and high filtration accuracy.
Ion exchange resin
Ion exchange resin is used to remove various anions and cations in working fluid and adsorb tiny particles. The accurate ratio of anion and cation resin can effectively purify water quality, reduce the conductivity of effluent water, and increase resistivity. It can ensure processing stability.
EDM jig
They are used to clamp the workpieces and ensure it maintains a stable position during cutting. Complete sets of fixtures can be pre-installed and pre-adjusted, significantly improving processing efficiency. Commonly used clamping devices include: mechanical clamps, vacuum adsorption or magnetic adsorption, etc.
Working fluid
Working fluid is a knid of media used to cool the cutting area, remove cutting waste and insulate the discharge area. Common working fluids include: pure water, WEDM concentrated ointment gel JR-3A, DIC-206 Water-Soluble WEDM Concentrate.
Other common used EDM parts
For example, brass electrode tube, copper electrode tube, wire guide, nozzle, roller, belt, bear, holder, gear, guide wheel pulley assembly and guide wheel, etc.
For more details, please visit our online mall: www.taguti.net or WhatsApp(+86 18936147916) for consultation.
