The main function of the wire cut EDM water nozzles is to flush and discharge the metal powders produced during electrical discharge machining and cool the brass wires. The materials of water nozzles are commonly made of ceramic or plastic. Accurate aperture control and verticality requirements will ensure the timely discharge of impurities in the processing gap by the upper and lower water columns, and at the same time reduce the impact of the jitter on the brass wire to a minimum.
X085C131H11, DFC6900, 265079, X085C131H01, DEG4400, 252182 Water nozzles upper and lower possess the precise internal diameter, vertical water column outlet, high wrapping of brass wire and good cost performance in electrical discharge machining, suitable for high speed cutting. ◆ Commodity: Lower nozzle composite ∅42*23.6mm ◆ TAGUTI number: M221 ◆ OEM...
X085C131H12, DEG45A, 267912, DFC7000, X085C131H02, DEG4500, 252208 Water nozzles upper and lower possess the precise internal diameter, vertical water column outlet, high wrapping of brass wire and good cost performance in electrical discharge machining, suitable for high speed cutting. ◆ Commodity: Lower nozzle composite ∅42*23.6mm ◆ TAGUTI number: M221 ◆...
X085C131H13, DFD7900, 265936 Water nozzles upper and lower possess the precise internal diameter, vertical water column outlet, high wrapping of brass wire and good cost performance in electrical discharge machining, suitable for high speed cutting. ◆ Commodity: Lower nozzle composite ∅42*23.6mm ◆ TAGUTI number: M221 ◆ OEM numbers: ID=Φ10.0mm X085C131H13,...
