The quality of power feed contact in wire cut EDM processing directly affects the cutting speed and wire breakage rate. TAGUTI brand power feed contacts for low speed wire cut EDM use tungsten and cobalt materials of high purity. The surface of conductive block is precisely ground and polished with precise dimensions, rounded corners, small contact resistance, good conductivity, which is not easy to break but suitable for manual or automatic threading and high current processing for wire cut EDM.
◆ Commodity: Power supply 23 x 7.7 x 2.8mm ◆ TAGUTI number: F005 ◆ OEM numbers: A290-8101-X750 ◆ Packing quantity: 1 pc(s) ◆ Machine type: Fanuc α-0A with AWF, Fanuc α-0A without AWF, Fanuc α-0B with AWF, Fanuc α-0B without AWF, Fanuc α-1A with AWF, Fanuc α-1A without AWF, Fanuc...
A97L-0126-0001 / 15S1P Power feed contact is selected with all new high density raw materials with precious grinding, accurate size and good conductivity, suitable for high current cutting. Power feed contact is also called conductivity block or power feeder. ◆ Commodity: Electrode pin Φ15.9*Φ6.3*6.3mm ◆ TAGUTI number: F002 ◆ OEM numbers:...
A290-8110-X750 ,A290-8119-Z780 Power feed contact is selected with all new high density raw materials with precious grinding, accurate size and good conductivity, suitable for high current cutting. Power feed contact is also called conductivity block or power feeder. ◆ Commodity: Power supply◆ TAGUTI number: F006◆ OEM numbers: A290-8110-X750 F006 23*12*4mm, 24.5*12*4mm...
